Designed by
BALSA USA
Full range of Balsa USA BUSA Kits available, if it is not listed email us at sales@petenplanes.com.au and we will get it in if available.
 |
BALSA USA 1/4 SCALE 3 POINT WW1 FLOAT KIT (PR)BALSA USA 1/4 SCALE 3 POINT WW1 FLOAT KIT (PR)
BALSA USA KIT NO. 459 1/4 SCALE 3 POINT WWI FLOAT SET (FLOATS ONLY)
The Balsa USA 3-Point "WWI Floats" are built utilizing Balsa, Basswood, and Plywood. Pre drilled metal mounting tangs… $446.20 |
|
 |
BALSA USA BUSA 1/3 SCALE LEWIS GUN KITBALSA USA BUSA 1/3 SCALE LEWIS GUN KIT
"Allied Lewis Gun"
Often seen on the upper wings of Nieuport's and S.E.5a's, the lightweight Lewis Gun could always be counted on when needed.
This is a kit, assembly is requir… $68.94 |
|
 |
BALSA USA BUSA 1/4 SCALE LEWIS GUN KITBALSA USA BUSA 1/4 SCALE SPANDAU GUN KIT
German Spandau Gun
It was the Spandau Guns that did the talking for Manfred von Richtofen, the "Red Baron", when he and his Blood Red Triplane had something to say!
This is kit, assembly is requ… $88.00 |
|
 |
BALSA USA BUSA 1/4 SCALE LEWIS GUN KITBALSA USA BUSA 1/4 SCALE LEWIS GUN KIT
Allied Lewis Gun
Often seen on the upper wings of Nieuport's and S.E.5a's, the lightweight Lewis Gun could always be counted on when needed.
This is a kit, assembly is required.
COMMENTS: Assembly&… $88.00 |
|
 |
Balsa USA BUSA - 1/4 SCALE EDO FLOATS 44" LBalsa USA BUSA - 1/4 SCALE EDO FLOATS 44" L
Our Ultimate Series 1/4 Scale float kit exactly duplicate Edo's 1400 series right down to the last fitting. Although the floats were designed for use on a J-3 Cub, they can be adapted for u… $593.00 |
|
|
Balsa USA BUSA - 1/3 SCALE EDO FLOATS 59" LBalsa USA BUSA - 1/3 SCALE EDO FLOATS 59" L
Our Ultimate Series 1/3 Scale float … $720.00 |
|
 |
Balsa USA BUSA - 1/3 FLY BABY BIPE, 2235mm WS 35-45cc GASBalsa USA BUSA - 1/3 FLY BABY BIPE, 2235mm WS 35-45cc GAS
Center of Gravity: 7-1/2 inches back from the leading edge of the Centerline.
Control Throws:
Elevator: 1-1/2 inches up and down.
Rudder: 2-1/2 inches left and right.
Ailerons: 2 … $1566.00 |
|
 |
Balsa USA BUSA - TAUBE 40, 62" SP. .30-.46-..40/.50 4CBalsa USA BUSA - TAUBE 40, 62" SP. .30-.46-..40/.50 4C
Center of Gravity: 3-5/8 inches back from the leading edge of the Wing.
Control Throws:
Elevator: 1/2 inch up and down.
Rudder: 1-3/4 … $436.00 |
|
 |
Balsa USA BUSA - 1/4 SC. JUNKERS D-1 2248mm WS 35-62cc Balsa USA BUSA - 1/4 SC. JUNKERS D-1 2248mm WS 35-62cc
Wing Span -- 88-1/2 in.
Wing Area -- 1500sq.in.
Weight -- 23 - 28 lbs
Wing Loading -- 35 - 43 oz./sq.ft.
Fuselage Length -- 63-3/4 in.
Engine Size -- 35 - 62cc Gasolin… $1100.00 |
|
 |
Balsa USA BUSA - 1/6 NIEUPORT 17, 1397mm SP. .35-.50 2CBalsa USA BUSA - 1/6 NIEUPORT 17, 1397mm SP. .35-.50 2C
Center of Gravity: 3-3/8 inches back from the leading edge of the Top Wing at the centerline.
Control Throws:
Elevator: 1/2 inch up and down.
Rudder: 1-1/2 inches left and right.
Ailerons… $834.00 |
|
 |
Balsa USA BUSA - 1/4 SC. SE5A, 2032mm SP. 1.20/1.50 4C Balsa USA BUSA - 1/4 SC. SE5A, 2032mm SP. 1.20/1.50 4C
Center of Gravity: 4 5/8 - 5 7/8 inches back from the leading edge of the Top Wing.
Control Throws:
Elevator: 1-1/4 inches up and down.
Rudder: 2 inches left and right.
Ailerons: 3/4… $1460.00 |
|
 |
Balsa USA BUSA - 1/4 SC. NIEUPORT 17, 80" SP. 1.20 4C Balsa USA BUSA - 1/4 SC. NIEUPORT 17, 80" SP. 1.20 4C
Center of Gravity: 4 inches back from the leading edge of the Top Wing at the Center.
Control Throws:
Elevator: 1-3/4 inches up and down.
Rudder: 2-2 3/4 inches left a… $1153.00 |