Product Information
Thunder Tiger - Sea Fury 1/7th Scale - Coming soon!
|
|
The premium scale series Sea Fury comprises many scale details such as; a sleek fiberglass fuselage that incorporates scale panel lines, airfoil control surfaces which provide
smooth tracking at both low and high speed flight.
|
| |
|
Specification:
Wing Span: 67 3/4 " / 1720mm
Length: 60 " / 1525mm
Weight: 13 lbs. / 5,900 g.
Req. Engine: .90 - 2 Cycle / 1.20 - 4 Cycle
Req. Radio: 5~8 Channel - 6~8 servos req.
|
The quality and flight performance are due to select grade components like high quality balsa and plywood, fully sheeted wings and tail surfaces, premium hardware throughout, heavy-duty retractable landing gear, high polished aluminum spinner, and vacuum formed canopy and pilot.
If you're looking for that next low wing airplane or a scale enthusiast, the premium scale series is just for you. Scale models that not only look good but also fly great as well. The Sea Fury's smooth flight characteristics during high-speed flight are pattern like, and when flaps are fully deployed the sensation of flying a high wing trainer can be felt.
Features:
- Factory Pre-painted fiberglass fuselage and cowl
- 3 - Blade Aluminum Spinner included
- Superlite retract gear with 4.5mm wire included
- Aileron and Flap control surface
- Detailed WWII decal applied
|
Accessories Needed:
- Radio Set - Transmitter (5~8 channels), Standard Servos - x6, x2 retract servo (opt), x2 12' extension wires
and x1 "Y" extension wire for aileron, x1 - 6" extension wire for battery, Receiver, Battery, Foam, Rubber Band.
- Engine - Airplane engine (.90 - 2 Cycle / 1.20 - 4 Cycle), Glow Plug, Glow Fuel (15%), 1.5V Glow Starter,
12V Fuel Pump, 12V Battery, 12V Electric Starter, Glow Plug Wrench.
- Adhesives - Instant setting Cyanoacrylate adhesive (thin CA), Slow setting Cyanoacrylate adhesive (thick CA),
10 minute Epoxy (fast), 20 - 30 minute Epoxy (slow).
- Tools - Ruler, Hobby knife and blades, Scissors, Steel straight edge, Long nose pliers and diagonal cutting pliers, Fine-point or felt-tip pen, Phillips and flat head screw drivers, Drill bits (1/16", 5/64", 3.4mm), M4x0.7 Tap, Straight building board, Sanding block.
|
|
|
|
