Product Information
F16 EDF Ducted Fan RC Jet, ARF
Easy to fly Ducted Fan jet - smooth and stable
included 14.8V,2100mah Lipoly battery,B/L ESC, 5*9gram servos Pre-installed
Light and fast - super performance when mated with a JetScreamer motor
24-3/4" wingspan, 33-3/4" long, 181 sq. in. wing area, 17 oz. flying weight. The jet is molded entirely from polystyrene foam and completely pre-painted, ready for assembly. Complete instructions are provided along with an exploded view drawing of the jet. The assembly is not difficult but prior building experience is recommended. Assembly will take 6-8 hours depending on choice of glues. Waterslide decals are included. A wide selection of motors can be installed in the included Alfa 60/15 Mark II fan unit. We recommend the JetScreamer (MMC5156) for ballistic performance and jet like speed. All aerobatic maneuvers are possible with the exception of those requiring a rudder. The jet is designed for hand launching and belly landing, the bottom of the fuselage has a plastic shell reinforcement to reduce wear. The landing speed is very slow when built to the recommended weight. Three micro servos are required, two for ailerons and one for elevator.
Watch the Video!!
|
Product Name：F-16
|
|
Wing Span：780mm
|
|
Length：1230mm
|
|
Flying Weight：1000g
|
|
Servo：9g×5
|
|
Radio Control set required：4CH Transmitter、6CH Receiver
|
|
Battery：14.8v/2100MAh/20C Li-poly battery
|
|
ESC：45A brushless
|
|
KIT/ARF/RTF：ARF
|
