RC-CDI IGNITION UNIT BY RCEXL to replace stock Zenoah G20 / 200PU & G26EI Ignitions
The standard Zenoah Electronic ignition can draw around 2 AMPS! Whereas the RCEXL one will only draw around 650mA at 8000rpm!
Get longer run times and more flights from your ignition battery OR save weight and use a smaller battery than is normally required to run the stock Zenoah ignition.
A 1200mah 4.8v Nicad or Nimh will safely provide around 2 hours running time.
RCXCEL Single system for 10mm thread NGK-CM6 Spark plugs used on the Zenoah G20ei / 200PU
Includes Auto Advancing Ignition unit (CDI) with hall sensor bracket & sensor.
If converting Magneto version of G26 you will need the kit that includes the hub/magnet
Instructions available in .pdf
Replacement spark plug caps also available to suit